Basic Info.
Model NO.
RG-CM300
Net Weight
35kg
Control
Manual
Spray Distance
20m
Transport Package
Flight Case
Specification
890x400x100(MM)
Trademark
RIGEBA
Origin
Guangzhou, China
HS Code
8515900000
Production Capacity
1000PCS/Month
Product Description
Rainbow Machine Entertainment Amusement Machine
Product information:
Sizes: 67.5 x 38 x 123cm
Weight: 50 Kg
Power: No power required
Requires: 0,2-0,4 kilo liquid CO2 per second 3-10 Kg confetti per minute
Reach: 15-20 meters high
Use: Inside and outside (dry weather!)
Sound: > 80 Db
Colour: Black or other colours if required
Installation
1. Put the blaster on a steady and clean underground.
2. Remove the top piece of the flight case by lifting this up straight and take out the woofer (1), the CO2 gas hose (2), the adjustable key (3) and two pins.
3. Select the position (4 positions) of the woofer and attach the pins including the cotter pins to fasten the woofer. Make sure the gas hose link with tap (6) is at the bottom of the machine.
4. Put the CO2 gas cylinder (5) in the optional gas cylinder holder or put in a position were it stays stable and fastened (by using a fastener). If you require a more smoky effect and more drive you should take a CO2 gas cylinder with dip tube.
5. Connect the hose to the CO2 gas cylinder and tight it with the adjustable key.
6. Connect the other end of the gas hose to the connection of the woofer Prevent crinkles or cracks. !! WATCH OUT: make sure the crane is in the "off" position. (the switch under the woofer and set square on the hose) When this is not the case the confetti canon is on and there can escape a quantity of CO2 gas as soon as the gas tap is opened, this causes that the highest pressure of the cylinder is be removed!!
7. Make sure the flight case is fastened by the help of the lock-system on wheels.
8. Turn open the gas tap carefully and check if there aren't any leaks. Immediately close the tap if the gas hose is leaking. Fasten the connection more tightly when there is a leak.
9. Ensure after using, the gas tap should always be closed and be sure that there is no CO2 left in the hose, by opening the switch under the woofer. If the hose still contains CO2 it could shoot away witch can be seriously dangerous!!
Operating instructions
1. Make sure the bottom of the confetti cannon is filled with a hand full of confetti as a starting quantity (don't use more, this can cause blockage in the woofer when turned on).
2. Make sure the space around the canon is free of people and obstacles.Than turn on the CO2 gas cylinder.
3. When the blast is required the switch needs to be turned on downside,parallel to the hose. At that moment there will escape a huge quantity of CO2 out of the woofer and the confetti will be launched into the air. You can now put in the confetti manually and divided into doses at the back site on the top side of the bin (so don't put it in the woofer, cause the woofer sucks the confetti vacuum from the bottom. You have approximately 60 seconds to launch 3-5Kgs with the blaster.
4. If quantity of confetti is all launched or the CO2 gas cylinder is empty you have to turn the switch back in the "off" position.
Delivering and shipping
Why choose us?
--Professional manufacturer with 12 years stage equipment experience, brand RIGEBA is hot selling all over the world.
--OEM&ODM: OEM&ODM order and sample order are welcome.
--Product line: led dance floor, led par light, led moving head light, moving head light, led wall washer light, led display screen, led profile light, (led) follow spot light, DMX controller/ console & Dimmer, gobo light, led blinder light, effect light, truss, stage, flight case, cable ramp, led furniture, etc.
--Good quality: high quality material, gorgeous effect, favorable comment from our customers.
--Good price: wholesale factory price.
--Good service: professional and patient sales team and after sales team, serving you for all projects and rental/wholesale/retail businesses.
--Warranty: One year, two years, or three years warranty, life long after service. Normal warranty is 1 year, if you need longer warranty, please contact us.
FAQ
Q: Are you a factory or trading company?
A: We are manufacturer with export qualification, provide competitive factory price.
Q: Where is your factory located? How can I visit there?
A: Our factory address is: No.68 Huagang Dadao, Xinhua Street, Huadu District, Guangzhou City, China.
We are close to the Guangzhou Baiyun Airport and the Guangzhou north subway station, we can pick you up, please contact our sales team for more details. We have our hot selling product in our showroom, warmly welcome to visit our factory.
Q: How to get the latest price?
A: If you want the latest price, Please email or call us with the items names or No. and your needing quantity you are interested in, or send us your inquiry at the bottom of the product page.
Q: Do the products have any certificate?
A: Yes, our products have CE and ROHS certification, please contact us if you need other certifications.
Q: How to place an order?
A: Please kindly send us your order by email, we will confirm the quotation with you. We wish to know the information: delivery information (name, company, address, zip code, mobile/telephone number, transportation way) and production information (product details, order quantity, customized logo or not, etc.)
Q: What is your product range?
A: led dance floor, led par light, led moving head light, moving head light, led wall washer light, led display screen, led profile light, (led) follow spot light, DMX controller/ console & Dimmer, gobo light, led blinder light, effect light, truss, stage, flight case, cable ramp, led furniture, etc.
Q: What is the payment term?
A: We accept T/T, Western Union, PayPal, L/C.
Q: Can you help me to print our logo or company name on the products or package?
A: Of course yes, OEM&ODM order is warmly welcomed.
Q: If the products are broken, how shall I get the spare parts?
A: Normally we will send you some free spare parts together with your order, for more problems, please contact us, our serving staff will check and discuss the problem with our engineer, then give you repairing suggestion and deal with you for the needed spare parts delivery.
Q: How long is the warranty?
A: One year, two years, or three years warranty, life long after service. Normal warranty is 1 year, if you need longer warranty, please contact us.
Company Information
Guangzhou Geliang Lighting Technology Limited Company ((Hong Kong)RIGE Technology CO., Limited) is a collection of engineering design/development /production/sales and service of high-tech exported private enterprises. Located in Huadu, Guangzhou, where is center of Guangdong, as known as LED Developing Metro of Pearl River Delta, we got convenient traffic and rich atmosphere of LED industry development.
Professional producing team
With more than 12 years experiences for producing the Professional Led Stage Lighting. Our production teams know every detail and also know how to control the quality to the best.
Professional service team
"Keep Learning; Take the challenge, Team-work" is our soul
"Quality, innovation, Service" is our management idea
Professional Research team
Basic on the development of the LED and demand of stage market, we develop and produce following series device independently with advanced technology and concepts:
Stage truss, LED Lights for advertising, LED stage,Light, LED outdoor searching light, LED moving Head Light, DMX console and other stage device.
The tenet
With the good environment provided by the company, all staffs offer good, distinctive and functional products with sustained innovation and provide comprehensive additional service to par customers to realize the life value of the staffs, social value of the company and economic value of the.
Customer First, Service Foremost!
Contact information:
Jamie
Product information:
Sizes: 67.5 x 38 x 123cm
Weight: 50 Kg
Power: No power required
Requires: 0,2-0,4 kilo liquid CO2 per second 3-10 Kg confetti per minute
Reach: 15-20 meters high
Use: Inside and outside (dry weather!)
Sound: > 80 Db
Colour: Black or other colours if required
Installation
1. Put the blaster on a steady and clean underground.
2. Remove the top piece of the flight case by lifting this up straight and take out the woofer (1), the CO2 gas hose (2), the adjustable key (3) and two pins.
3. Select the position (4 positions) of the woofer and attach the pins including the cotter pins to fasten the woofer. Make sure the gas hose link with tap (6) is at the bottom of the machine.
4. Put the CO2 gas cylinder (5) in the optional gas cylinder holder or put in a position were it stays stable and fastened (by using a fastener). If you require a more smoky effect and more drive you should take a CO2 gas cylinder with dip tube.
5. Connect the hose to the CO2 gas cylinder and tight it with the adjustable key.
6. Connect the other end of the gas hose to the connection of the woofer Prevent crinkles or cracks. !! WATCH OUT: make sure the crane is in the "off" position. (the switch under the woofer and set square on the hose) When this is not the case the confetti canon is on and there can escape a quantity of CO2 gas as soon as the gas tap is opened, this causes that the highest pressure of the cylinder is be removed!!
7. Make sure the flight case is fastened by the help of the lock-system on wheels.
8. Turn open the gas tap carefully and check if there aren't any leaks. Immediately close the tap if the gas hose is leaking. Fasten the connection more tightly when there is a leak.
9. Ensure after using, the gas tap should always be closed and be sure that there is no CO2 left in the hose, by opening the switch under the woofer. If the hose still contains CO2 it could shoot away witch can be seriously dangerous!!
Operating instructions
1. Make sure the bottom of the confetti cannon is filled with a hand full of confetti as a starting quantity (don't use more, this can cause blockage in the woofer when turned on).
2. Make sure the space around the canon is free of people and obstacles.Than turn on the CO2 gas cylinder.
3. When the blast is required the switch needs to be turned on downside,parallel to the hose. At that moment there will escape a huge quantity of CO2 out of the woofer and the confetti will be launched into the air. You can now put in the confetti manually and divided into doses at the back site on the top side of the bin (so don't put it in the woofer, cause the woofer sucks the confetti vacuum from the bottom. You have approximately 60 seconds to launch 3-5Kgs with the blaster.
4. If quantity of confetti is all launched or the CO2 gas cylinder is empty you have to turn the switch back in the "off" position.
Delivering and shipping
| Price terms | EXWork, CIF, CNF, optional |
| Certificates | CE, ROHS, please feel free to contact our sales team if you need other certificate |
| Shipping methods | Express shipping, air shipping, sea shipping |
| Shipping time | Normal time, depends on the destination, urgent order please contact our sales team |
| Payment terms | T/T, Western Union, PayPal, L/C. |
| Sample order | 3-7 working days after payment (depends on stock status) |
| Production time | 7-20 working days, larger quantity or OEM&ODM order might cost longer production time, please confirm with our sales team |
| Package | Carton, flight case, plywood case |
Why choose us?
--Professional manufacturer with 12 years stage equipment experience, brand RIGEBA is hot selling all over the world.
--OEM&ODM: OEM&ODM order and sample order are welcome.
--Product line: led dance floor, led par light, led moving head light, moving head light, led wall washer light, led display screen, led profile light, (led) follow spot light, DMX controller/ console & Dimmer, gobo light, led blinder light, effect light, truss, stage, flight case, cable ramp, led furniture, etc.
--Good quality: high quality material, gorgeous effect, favorable comment from our customers.
--Good price: wholesale factory price.
--Good service: professional and patient sales team and after sales team, serving you for all projects and rental/wholesale/retail businesses.
--Warranty: One year, two years, or three years warranty, life long after service. Normal warranty is 1 year, if you need longer warranty, please contact us.
FAQ
Q: Are you a factory or trading company?
A: We are manufacturer with export qualification, provide competitive factory price.
Q: Where is your factory located? How can I visit there?
A: Our factory address is: No.68 Huagang Dadao, Xinhua Street, Huadu District, Guangzhou City, China.
We are close to the Guangzhou Baiyun Airport and the Guangzhou north subway station, we can pick you up, please contact our sales team for more details. We have our hot selling product in our showroom, warmly welcome to visit our factory.
Q: How to get the latest price?
A: If you want the latest price, Please email or call us with the items names or No. and your needing quantity you are interested in, or send us your inquiry at the bottom of the product page.
Q: Do the products have any certificate?
A: Yes, our products have CE and ROHS certification, please contact us if you need other certifications.
Q: How to place an order?
A: Please kindly send us your order by email, we will confirm the quotation with you. We wish to know the information: delivery information (name, company, address, zip code, mobile/telephone number, transportation way) and production information (product details, order quantity, customized logo or not, etc.)
Q: What is your product range?
A: led dance floor, led par light, led moving head light, moving head light, led wall washer light, led display screen, led profile light, (led) follow spot light, DMX controller/ console & Dimmer, gobo light, led blinder light, effect light, truss, stage, flight case, cable ramp, led furniture, etc.
Q: What is the payment term?
A: We accept T/T, Western Union, PayPal, L/C.
Q: Can you help me to print our logo or company name on the products or package?
A: Of course yes, OEM&ODM order is warmly welcomed.
Q: If the products are broken, how shall I get the spare parts?
A: Normally we will send you some free spare parts together with your order, for more problems, please contact us, our serving staff will check and discuss the problem with our engineer, then give you repairing suggestion and deal with you for the needed spare parts delivery.
Q: How long is the warranty?
A: One year, two years, or three years warranty, life long after service. Normal warranty is 1 year, if you need longer warranty, please contact us.
Company Information
Guangzhou Geliang Lighting Technology Limited Company ((Hong Kong)RIGE Technology CO., Limited) is a collection of engineering design/development /production/sales and service of high-tech exported private enterprises. Located in Huadu, Guangzhou, where is center of Guangdong, as known as LED Developing Metro of Pearl River Delta, we got convenient traffic and rich atmosphere of LED industry development.
Professional producing team
With more than 12 years experiences for producing the Professional Led Stage Lighting. Our production teams know every detail and also know how to control the quality to the best.
Professional service team
"Keep Learning; Take the challenge, Team-work" is our soul
"Quality, innovation, Service" is our management idea
Professional Research team
Basic on the development of the LED and demand of stage market, we develop and produce following series device independently with advanced technology and concepts:
Stage truss, LED Lights for advertising, LED stage,Light, LED outdoor searching light, LED moving Head Light, DMX console and other stage device.
The tenet
With the good environment provided by the company, all staffs offer good, distinctive and functional products with sustained innovation and provide comprehensive additional service to par customers to realize the life value of the staffs, social value of the company and economic value of the.
Customer First, Service Foremost!
Contact information:
Jamie